Continuous length, packed with 5 meter
Cuttable every 3 LEDs along the cutting marks, according to requirement.
Long life span 50,000+ hours
Flexible ribbon for curving around bends
Completely smooth and even light spread, solving the uneven luminous problem
Ultra-bright but running at low temperature
Low power consumption
Input voltage: 12V DC
Max output current:2A/ each channel
Maximum output power: 72W
Output: 12V DC, 3 * 2 A
Connect mode: Common Anode
Work temperature: -20~60 degree
Control distance: 5M (must be a certain degree to aimed at the ir receiver and without any obstacles)
Item color: White
Shell material: Plastic
Item dimension: 5.7 * 3.5 * 2.2cm/ (including 20cm/ 7.87in and 22cm/ 8.66in cable)
Remote controller dimension: 12.5 * 5.5 * 0.7cm/ 4.92 * 2.17 * 0.28in
item weight: 70g/ 2.46oz
Package weight: 92g/ 3.24oz
Input: 100-240VAC, 50/60Hz, 1.5A
Power consumption: 72W
*DC port: 5.5 x 2.5mm (outer diameter x inner diameter)
Adapter dimension: 104 x 50 x 30mm
Total lenght: 230cm (including power cord)
Weight : 272g
1 x 5M led strip light
1 x Signal receiver
1 x 44key Control board (with battery)
1 x 12VPower supply
Widely used for home decoration use, hotels, clubs, shopping malls
Architectural decorative lighting, boutique atmosphere lighting
Extensively applied in Backlighting, concealed lighting, channel letter lighting
Emergency & security lighting, advertisement sign lighting
Decorative lights for holiday, event, show exhibition
Applicable for automobile or contour lighting
the connector between the light strip and ir receiver must be arrow to arrow.Please advise if you have question.
This is a standard kit. The adaptor is UL listed.They can only load 16.4ft. Please don’t increase the strip light. Come with RGB LED strips, remote controller, UL listed AC adaptor and connectors. No more accessories are required. Don’t leave them on the spool when you going to test it for more than 2 mins, it easy to lead to overheating.The ventilation must be ensured.These lights need an excessive amount of airflow for cooling.
44key controller contained a DIY fuction , Press “DIY” botton and then just long press one of the arrow button to set it.Also it have dimming and brightness control. The strip is waterproof.but the control box and adapter are not.Don’t put them under the water.
Cuttable and linkable. Color changing LED Strip Lights can be cut to every 3 leds, its adhesive tape backing can be fit many dry flat surface
It’s can be change the color via the controller.It have White/Red/Green/Blue/Yellow and more option.Very suitable for indoor outdoor lighting and decor. Such as kitchen, under cabinet, dining room, bedroom, garden, patio, balcony, party, wedding etc.
Remarks: Comes with a full 12 month warranty, 30 days money back guarantee.If the power adapter or other accessories do not work, please contact us for help. Connect the load and power lines, make sure all connection right before power switched on; Insure there is no obstacle between the IR controller and the receiver when operating; Take off the plastic sheet of remotes battery before using.