Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/4″ Diameter, 2-1/4″ Length, 1-1/4″ Threaded Length (Pack Of 20)

$15.17

Wedge anchor provides a secure hold in solid masonry and uncracked concrete
Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors
Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code

Description

The Wej-It Ankr-TITE ATS wedge anchor with 304 stainless steel body provides a secure hold in solid masonry and uncracked concrete, meets Federal Specifications QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code. The anchor body, washer, nut, and clip are made of 304 stainless steel for increased corrosion resistance compared to galvanized or zinc-plated steel anchors. It must be installed into a drilled hole with a diameter equal to that of the anchor to an embedment depth of 1-1/4″ or greater. The washer lies flush against the mounting surface when the anchor is inserted into the hole, and the nut tightens with a wrench to draw the threaded portion of the anchor up, causing the clip to expand and secure the anchor in place. The clip has large dimples that provide traction to reduce slippage and increase hold in lightweight concrete. The dog point prevents damage during installation, and the safety shoulder above the clip provides support when the anchor is under severe strain.

Specifications

Ultimate Tensile Strength for Static Loads

Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4″1-1/4″2,000 lb.2,042 lb.
1/4″2-1/2″2,600 lb.2,826 lb.
3/8″1-3/4″3,850 lb.4,790 lb.
3/8″4-5/8″6,020 lb.6,635 lb.
1/2″2-1/8″6,324 lb.7,540 lb.
1/2″6-1/4″8,249 lb.10,713 lb.
5/8″2-5/8″9,527 lb.10,597 lb.
5/8″6″15,893 lb.16,705 lb.
3/4″3-3/4″13,130 lb.18,979 lb.
3/4″7-7/8″19,795 lb.24,145 lb.
7/8″4″16,591 lb.19,945 lb.
7/8″8″27,484 lb.33,113 lb.
1″5″26,676 lb.30,683 lb.
1″9″36,171 lb.36,171 lb.
1-1/4″5-5/8″28,733 lb.28,733 lb.
1-1/4″10″50,390 lb.50,390 lb.

Ultimate Shear Strength for Static Loads

Anchor DiameterAt Embedment Depth4,000-psi Concrete6,000-psi Concrete
1/4″1-1/4″2,811 lb.2,811 lb.
1/4″2-1/2″2,811 lb.2,811 lb.
3/8″1-3/4″3,075 lb.3,075 lb.
3/8″4-5/8″4,227 lb.4,227 lb.
1/2″2-1/8″6,260 lb.6,260 lb.
1/2″6-1/4″7,516 lb.7,516 lb.
5/8″2-5/8″9,760 lb.9,760 lb.
5/8″6″11,743 lb.11,743 lb.
3/4″3-3/4″15,860 lb.15,860 lb.
3/4″7-7/8″23,817 lb.23,817 lb.
7/8″4″24,000 lb.24,000 lb.
7/8″8″25,710 lb.25,710 lb.
1″5″32,494 lb.32,494 lb.
1″9″36,896 lb.36,896 lb.
1-1/4″5-5/8″46,975 lb.46,975 lb.
1-1/4″10″46,975 lb.46,975 lb.

Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer’s literature.

Anchors provide reinforcement to fasteners installed in materials that are considered brittle or have insufficient hold such as drywall, concrete, brick, and stone. Anchors provide support through methods such as expansion from within or behind the substrate, or insertion of adhesive compounds into drilled holes.

Wej-It Fastening Systems manufactures mechanical and adhesive fasteners for use in concrete and drywall. The company, founded more than 60 years ago, is headquartered in Norwalk, CT.

Wedge anchor provides a secure hold in solid masonry and uncracked concrete
Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors
Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code
Ultimate tensile strength is 2,000 lb. at 1-1/4″ embedment depth in 4,000-psi concrete with a static load
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
[amz_corss_sell asin=”B009EARG2W”]

Ready to ship in 1-3 business day from United States (US)


Shipping cost:

$44.90
United States (US) $11.95

Extra shipping Cost for each additional quantity of this product : $4.95

 

 

Additional information

Binding

Brand

Label

Manufacturer

Model

MPN

NumberOfItems

PackageDimensions

PackageQuantity

PartNumber

ProductGroup

ProductTypeName

Publisher

Size

Studio

Reviews

There are no reviews yet.

Be the first to review “Wej-It Ankr-TITE ATS Wedge Anchor, 304 Stainless Steel, Meets QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1 Specifications, 1/4″ Diameter, 2-1/4″ Length, 1-1/4″ Threaded Length (Pack Of 20)”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Seller Information

  • Store Name: Fasteners
  • Seller: Fasteners
  • Address: 20355 ne 34 ct
  • No ratings found yet!

Welcome to Our Store

X
Welcome to Our Store
Welcome to Fasteners
WooChatIcon 0